unisonic technologies co., ltd sb360 preliminary diode www.unisonic.com.tw 1 of 3 copyright ? 2013 unisonic technologies co., ltd qw-r601-081.a 3.0a schottky barrier rectifier ? description the utc sb360 is 3.0a schottky barrier rectifier. it uses utc?s advanced technology to provide customers with high current capability and low forward voltage drop, etc. the utc sb360 is suitable for free wheeling, low voltage and polarity protection applications, etc. ? features * low forward voltage drop * high surge capability * low power loss * high efficiency * high current capability do-201ad 1 2 ? ordering information ordering number package pin assignment packing lead free halogen free 1 2 sb360l-z21d-r SB360G-Z21D-R do-201ad k a tape reel note: pin assignment: a: anode, k: cathode
sb360 preliminary diode unisonic technologies co., ltd 2 of 3 www.unisonic.com.tw qw-r601-081.a ? absolute maximum ratings (t a =25c, unless otherwise specified) parameter symbol ratings unit dc blocking voltage v r 60 v peak repetitive reverse voltage v rrm 60 v working peak reverse voltage v rwm 60 v rms reverse voltage v r ( rms ) 42 v average rectified output current (note 2) i o 3.0 a non-repetitive peak forward surge current 8.3ms single half sine-wave superimposed on rated load (jedec method) i fsm 80 a forward voltage (note 3) i f =3.0a v fm 0.74 v peak reverse current at rated dc blocking voltage (note 3) t a =25c i rm 0.5 ma t a =100c 10 ma junction to ambient (note 4) ja 30 c/w junction to lead (note 4) jl 10 c/w storage temperature t j -65~+150 c operating junction temperature t stg -65~+150 c notes: 1. absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. 2. measured at ambient temperature at a distance of 9.5mm from the case. 3. short duration pulse test used to minimize self-heating effect. 4. thermal resistance from junction to lead vertic al p.c.b. mounted, 0.500" (12.7mm) lead length with 2.5x2.5" (63.5x63.5mm) copper pad.
sb360 preliminary diode unisonic technologies co., ltd 3 of 3 www.unisonic.com.tw qw-r601-081.a utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
